curtsnow
0 0

Minn Kota Fortrex Install...

104656 回
26 画像 — 2 年前
Pics of the installation of a new Minn Kota Fortrex trolling motor.
0603211926.jpg
Everything cleaned up, nice and tidy :)
0603211923_HDR.jpg
Installation complete.
0603211847b_HDR.jpg
Transducer installed and cable routed.
0603211557_HDR.jpg
New connector installed
0603211553_HDR.jpg
Time to connect the wiring!
0603211508_HDR.jpg
Installing the prop.
0603211507_HDR.jpg
Warning to throw the red washer away!
0603211506.jpg
Instructions for installing the prop.
0603211510_HDR.jpg
Bolting the motor on tightly.
0603211502_HDR---edited.jpg
This bolt holds the motor on. Be sure to tighten it securely!
0603211439b_HDR.jpg
The motor now gets hung on the bracket.
0603211429a_HDR.jpg
Installing the screws to secure the pin in the piston arm.
0603211429_HDR.jpg
Adding the second spacer.
0603211428a_HDR.jpg
Sliding the pin into the piston arm.
0603211428_HDR.jpg
Sliding the pin into the first spacer.
0603211427_HDR.jpg
Checking the fit of the pin and associated hardware.
0603211426_HDR.jpg
Parts needed to complete the installation of the piston for the Lift Assist.
0603211425a_HDR.jpg
Time to connect the Lift Assist piston to the bracket.
0603211240_HDR.jpg
Installing bolts to secure the mounting bracket to the hull.
0603211240a_HDR.jpg
Installing bolts to secure the mounting bracket to the hull.
0602211941_HDR.jpg
0602211941 HDR
0602211941a_HDR.jpg
0602211941a HDR
0602211937_HDR.jpg
0602211937 HDR
0602211930a_HDR.jpg
0602211930a HDR