If you look closely at the bracket, you can see that there was a mistake made when drilling the hole for this bolt. Thankfully, they re-drilled it in the correct location, so it didn't cause any real headaches. The hole they drilled was a tad smaller than the others, so I had to fanangle it a bit to get it to line up with the hole in the boat.

Installing bolts to secure the mounting bracket to the hull.

6374 views

3468 × 4624 — JPG 2.6 MB

Added to Minn Kota Fortrex Install... 2 years ago

If you look closely at the bracket, you can see that there was a mistake made when drilling the hole for this bolt. Thankfully, they re-drilled it in the correct location, so it didn't cause any real headaches. The hole they drilled was a tad smaller than the others, so I had to fanangle it a bit to get it to line up with the hole in the boat.

LGE LM-V600 1/24s ƒ/180/100 ISO250 5580/1000mm — More Exif data

  • Manufacturer LGE
  • Model LM-V600
  • Exposure Time 1/24s
  • Aperture ƒ/180/100
  • ISO 250
  • Focal Length 5580/1000mm
  • X Resolution 72/1 dpi
  • Y Resolution 72/1 dpi
  • Resolution Unit inches
  • Color Space sRGB
  • Orientation Rotate 90 CW
  • Brightness Value -1/100
  • Sensing Method Monochrome area
  • Scene Capture Type Standard
  • Exposure Bias Value 0/6
  • Max Aperture Value 169/100
  • Exposure Program Program AE
  • Exposure Mode Auto
  • Metering Mode Center-weighted average
  • Light Source D65
  • Flash Off, Did not fire
  • White Balance Auto
  • Exif Version 0220
  • Date Time Original 2021-06-03 12:40:01
  • Date Time Digitized 2021-06-03 12:40:01